In class Mr. Huber explained to the guitar builders how we would go about mounting the tuners on our guitars, however my tuners were not a match for the one he described on how to install as they had special holes that needed to be drilled, and although I had some help from a fellow student who had done this before, I had to come up with an accurate method in which to drill the holes to properly line them up. I put the tuners in and then used squares to properly mark out the spot to drill. Once I drilled the holes however, some of them had likely shifted a small amount as the tuners were not perfectly in line to solve this issue I used a different sixed drill bit that would give me some more wiggle room to move the tuners to appear more inline without showing that a larger hole had to be drilled.